Having slippery shoes is not only dangerous, but it also makes it inconvenient to walk with them. You always need non-slip shoes for going to work or for playing football. Nobody likes a person who walks weirdly. Slippery shoes make a high impact on your performance and personality. So, for you to get over them, here you will know how to make your shoes non-slip with hot glue. So, let’s begin.
Table of Contents
Things You Need:
- Glue Gun
- Glue Sticks
- Clean Dry Cloth
Step by Step Procedure to Make Shoes Non-Slip with Hot Glue
Step 1: Check if there are any holes
Before you begin fixing your shoes, firstly, you need to check if there are any holes present in your shoe sole. If yes, then you need to change the entire sole of your shoe. But if there are no holes, then you can start fixing them already.
Step 2: Clean your shoes
Once you have checked the holes, now it’s finally time to clean your shoes first before fixing them. For this, take some amount of alcohol on a clean cloth. Now rub this alcohol cloth on your shoes and clean them.
Step 3: Heat the Glue
When you finish cleaning your shoes, then finally it’s time to start fixing it. Take a glue stick and place it in your glue gun. Now plug in your glue gun with an electric source and turn the power on. Once your glue is heated, start to put the glue on the bottom of the shoe using the hot glue.
Make sure that you don’t test whether the glue is heated or not because it will burn your finger. You can make a pattern with glue or make lines for fixing your shoes easily.
Step 4: Wait for The Glue to Dry
Now, wait for the glue to dry. To make it bond properly, you can wear the shoe and walk on a hard and flat surface. This will make the bond stronger and will give an even level to the glue on the whole surface of your shoe. It takes almost fifteen to twenty minutes for the glue to be dried.
After following the above steps, you are now finally ready to walk with your non-slip stylish shoes. Fixing slippery shoes with hot glue is the most widely used way of making non-slip shoes with hot glue DIY.
Using hot glue for fixing your shoes is not a permanent solution. But it can surely help you for some time with your shoes. Non-slip shoes avoid injuries and accidents. So, for the temporary solution, using hot glue is the best for fixing the non-slip shoes.
To help you get rid of the non-slip shoes permanently, here are a few methods that you can use for fixing them completely.
Permanent Methods of Fixing Non-slip shoes
- Use grip pads
- Use hair spray
- Traction Spray for non-slip shoes
- Use Puff Paints
- Use non-slip outsoles
If you are in a hurry to go somewhere, you can use the hot glue method of fixing your shoes quickly. It is an easy and quick DIY method that can be done. The hot glue on the bottom of the shoes works as grippers and prevents you from slipping.
If you find it difficult to do, then you can even go for a permanent method like going to a cobbler, get your shoe resoled, or even getting a new pair of shoes for yourself.
So, by now, you will be having a clear idea of how to make shoes non-slip using hot glue. I hope you find this helpful for yourself!